[c-nsp] Cat 6500 and counters

[Tim Stevenson]

There is no IPv6 NF support, it is on the roadmap. It requires NFv9, which 
is not supported today. Both sup2 & sup720 support v5 NF for IPv4 unicast.

But as mentioned elsewhere, the most bang for the buck is no doubt sup720 
w/PFC3B, vs. sup2.

Tim

At 02:14 PM 4/27/2005, Jay Ford submitted:
> > What about netflow?  Does it work on the Sup2/MSFC2 and/or the Sup720?
> > I saw one post claiming "v5 only", so IPv6 netflow isn't there?
>
>Netflow v5 seems to work.  I don't try to do netflow for IPv6 yet.



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.