[c-nsp] 802.1q VLANs > 1000 on Cat 5500

[lists at hojmark.org]

> However, vlan/port/trunk configuration commands all still show
> (and enforce) VLAN IDs between 1 and 1005.

Hmm, are you running VTP transparent? (You should be).

> The RSMs also only allow interface VLANs as high as 1000 to be
> configured.

As I recall, the trunk to the RSM runs ISL, not 802.1Q, and ISL
trunks only support VLAN IDs 1-1000.

I guess you could work around that by mapping the high 802.1Q
VLAN ID to a low ISL VLAN ID ('set vlan map'), but only for a
few VLANs.

-A