[c-nsp] 2950G 'EI' image

[Patrick Aland]

No it doens't do L3 routing.

http://www.cisco.com/warp/public/765/tools/quickreference/

The above has a nice product sheet that shows the capablilites of all their
switches (Switch Performance is the one you'll want to use).

On 12/1/05, Peter Hicks <peter.hicks at poggs.co.uk> wrote:
>
> Hello
>
> Do the 2950G-48 EI switches support L3 switching?
>
> I have a site in Paris with two 4506s and SupII+ blades, and we want to
> run
> a fibre to another site and use a 2950 as a L3 switch.
>
> Cisco's site is a little vague - I know for sure the 3550s with EI support
> L3 switching, and I use them as a "poor man's SupII" for one of our sites
> where we only have a Sup1A.
>
>
> Peter.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



--
--Patrick