[c-nsp] Catalyst 4506 won't boot!?

[Xavier Mertens]

After a looooong time, I got:

 0: F  1: F  2: F  3: F  4: F  5: F  6: F  7: F  8: F  9: F 10: F 11: F
 12: F 13: F 14: F 15: F 16: F 17: F 18: F 19: F 20: F 21: F 22: F 23: F
 24: F 25: F 26: F 27: F 28: F 29: F 30: F 31: F

Port Traffic: L2 Asic Loopback ...

Xavier
--
The best things in life are free, but the expensive ones are still worth a look.

On Tue, 8 Feb 2005, Xavier wrote:

> Hi,
> 
> I just mounted a brand new Catalyst 4506 with the following modules:
> 
> Slot1: ws-x4013+=
> Slot2: ws-x4448-gb-rj45=
> Slot3: ws-x4306-gb=
> Slot4: ws-x4306-gb=
> 
> Here are the messages on console:
> 
>  **********************************************************
>  *                                                        *
>  * Welcome to Rom Monitor for WS-X4013+ System.           *
>  * Copyright (c) 1999-2003 by Cisco Systems, Inc.         *
>  * All rights reserved.                                   *
>  *                                                        *
>  **********************************************************
> 
>  Rom Monitor Program Version 12.1(20r)EW1
>  Supervisor: WS-X4013+  Chassis: WS-C4506
>  Hardware Revisions - Board: 5.4 CPLD: 3 Dagobah: 90
> 
> 
>  MAC Address  : 00-0e-83-5a-95-29
>  Ip Address   : Not set.
>  Netmask      : Not set.
>  Gateway      : Not set.
>  TftpServer   : Not set.
>  Main Memory  : 256 MBytes
> 
> 
> 
>  ***** The system will autoboot in 5 seconds *****
> 
> 
>  Type control-C to prevent autobooting.
>  . . . . .
> 
>  ******** The system will autoboot now ********
> 
> 
>  config-register = 0x2101
> 
>  Autobooting using the first file from bootflash.....
> 
> 
> Rommon reg: 0x5A004180
> 
> Running diags...
> 
> Decompressing the image
> ########################## [OK]
> 
> k2diags version 2.4.2
> 
> prod: WS-X4013+  part: 73-9447-02  serial: JAE0840XJPY
> 
> 
> Power-on-self-test for Module 1:  WS-X4013+
>  Port/Test Status: (. = Pass, F = Fail)
>  Reset Reason: PowerUp
> 
> 
> Port Traffic: L2 Serdes Loopback ...
> 
> And nothing more! Status LEDs are red on all modules!
> Any suggestion?
> 
> Xavier
> --
> "Research is what I'm doing when I don't know what I'm doing."
> - Wernher Von Braun (1912-1977) 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>