[c-nsp] Re: 3640 Flash errors

[Kim Onnel]

What is the way to validate if these flash sticks should work with the
current 3640 with the bootrom available, will a cco account or TAC
help ?


On Fri, 11 Feb 2005 20:22:08 +0200, Kim Onnel <karim.adel at gmail.com> wrote:
> When i took out the two flash sticks and put them back in, i got another error,
> 
> System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFT
> WARE (fc2)
> Copyright (c) 1994-1996 by cisco Systems, Inc.
> C3600 processor with 65536 Kbytes of main memory
> Main memory is configured to 64 bit mode with parity disabled
> 
> lseek out of bounds
> getdirent: lseek error
> an alternate boot helper program is not specified
> (monitor variable "BOOTLDR" is not set)
> and unable to determine first file in bootflash
> loadprog: error - on file open
> boot: cannot load "tftp:c3640-js-mz.122-15.T5.bin 40.40.40.2"
> 
> any ideas?
> 
> 
> On Fri, 11 Feb 2005 18:07:27 +0200, Kim Onnel <karim.adel at gmail.com> wrote:
> > Hi,
> >
> > I have a 3640 for my lab, on booting up, i get the errors below at the console,
> > i need to get it up, if i even have to use tftp, but then i would need
> > to log in to configure it to boot from tftp ( i need an advice here)
> >
> > And these are the 2 Flash sticks i have:
> >
> > - one of them is like : http://store1.yimg.com/I/memx_1827_44122144
> > but hte chipset reads
> >
> > Intel
> > E28F008SA
> > 120 Q110
> > U71610DQG
> > Flash
> >
> > - and the other also looks exactly like this one:
> > http://store1.yimg.com/I/memx_1828_98372683
> > but the chipset reads
> >
> > AM29f080b
> > -75ec
> > 0029mpm k
> > 1997 amd
> >
> > Console Errors:
> >
> > C3600 processor with 65536 Kbytes of main memory
> > Main memory is configured to 64 bit mode with parity disabled
> >
> > unknown flash deþ
> > System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFT
> > WARE (fc2)
> > Copyright (c) 1994-1996 by cisco Systems, Inc.
> > C3600 processor with 65536 Kbytes of main memory
> > Main memory is configured to 64 bit mode with parity disabled
> >
> > unknown flash device - mandev code = 0xffff
> > cannot read flash info
> > getdevnum warning: device "flash" has size of zero
> > unknown flash device - mandev code = 0xffff
> > cannot read flash info
> > getdevnum warning: device "flash" has size of zero
> > open: read error...requested 0x4 bytes, got 0x0
> > trouble reading device magic number
> > boot: cannot open "flash:"
> > an alternate boot helper program is not specified
> > (monitor variable "BOOTLDR" is not set)
> > and unable to determine first file in bootflash
> > loadprog: error - on file open
> > boot: cannot load "tftp:c3640-js-mz.122-15.T5.bin 40.40.40.2"
> >
> > System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT RELEASE SOFT
> > WARE (fc2)
> > Copyright (c) 1994-1996 by cisco Systems, Inc.
> > C3600 processor with 65536 Kbytes of main memory
> > Main memory is configured to 64 bit mode with parity disabled
> >
> > Your help is highlu appreciated,
> > Regards
> >
>