[c-nsp] 6748 dead again

[Sukumar Subburayan]

Brad,

Can you pls unicast me the case number and the S.nos of all the toher 6748s
which are working fine. We have seen isolated case of 6748 module going down
due to DC power failure. We would like to take a look a closer look at your
case.

thanks
sukumar

On Jul 5,  2:27pm, Brad Swanson wrote:
> Subject: [c-nsp] 6748 dead again
> Another ws-x6748-ge-tx died on a different 6509, dual sup720's.  This time
> slot 3, not 4...  Same code, 8.3.5 on the catOS side.  Dual 4000 watt power.
>   This is the 3rd dead 6748 in about 3-4 weeks.  There are at least 20 other
> 6748 cards running with the exact same hardware, but 8.2.2 code.  TAC case
> open...etc.  Any other users seeing something like this?  The actual
> messages:
>
> 2005 Jun 30 23:22:44 CDT -05:00 %SYS-3-FAB_SYNCERR:SYNC ERROR detected on
> fabric
> channel 2 from module 5
> 2005 Jun 30 23:22:44 CDT -05:00 %SYS-3-FAB_SYNCERR:SYNC ERROR detected on
> fabric
> channel 11 from module 5
> 2005 Jun 30 23:23:04 CDT -05:00 %SYS-1-FAB_MODSYNCERR:Connection between
> switch
> fabric module 5 and module 3 failed
> 2005 Jun 30 23:23:04 CDT -05:00 %SYS-5-MOD_RESET:Module 3 reset from
> Software
> 2005 Jun 30 23:24:10 CDT -05:00 %SYS-1-MOD_DCPWRMISMATCH:Module 3 DC power
> failure detected during polling
> 2005 Jun 30 23:24:10 CDT -05:00 %SYS-5-MOD_PWRDN:Module 3 powered down
> 2005 Jun 30 23:24:10 CDT -05:00 %SYS-5-MOD_NOTSUPPORTED:Module 3 is not
> supported
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>-- End of excerpt from Brad Swanson