[c-nsp] Question about FX connections

[Jeff Crowe]

Hi,

I am having a 100base FX connection setup between a supplier and myself and
have a couple of question.  The connection will be sent to us from a 7200
with a PA-2FE-FX (they specified this card).  From my reading, the PA-2FE-FX
only supports MMF, not SMF which the run is. The distance is about 1 - 1.5km
from end to end.

Am I going to run into problems with this?  If there are no problems, can I
use a WS-X5201R in a 5500 card on my side to terminate the connection?

Thanks,

Jeff.