[c-nsp] CEF not working on policy-routed interfaces?

[joshua sahala]

On (01/06/05 20:14), Ed Ravin wrote:
> 
> When I look at the CEF status of the interface, though, it says CEF is off
> (see the line marked with *******):
> 

Ed,

Is CEF enabled globally on the router?  According to this:
http://tinyurl.com/9y6og

  Beginning in Cisco IOS Release 12.0, PBR is supported in the Cisco
  Express Forwarding (CEF) switching path. CEF-switched PBR has better
  performance than fast-switched PBR and, therefore, is the optimal 
  way to perform PBR on a router.

  No special configuration is required to enable CEF-switched PBR. It 
  is on by default as soon as you enable CEF and PBR on the router. 

So CEF should be working...

/joshua
-- 
A common mistake that people make when trying to design something 
completely foolproof is to underestimate the ingenuity of complete
fools.
	- Douglas Adams -