[c-nsp] AS5400 TLB (Load/Fetch) Exception help

Rodney Dunn rodunn at cisco.com
Fri Jun 3 10:01:22 EDT 2005


I would have never guessed that.
Good find.

Rodney

On Fri, Jun 03, 2005 at 09:38:36AM -0400, Victor Matherly wrote:
> Hello all,
> 
> 
> After some further troubleshooting I have determined that it was a very simple 
> problem of the flash chips being in the wrong position. The boot flash chip 
> was in one of the system flash slots. After I figured out the correct 
> configuration I was able to download the SW files and get it ready for 
> service. 
> 
> Thanks for the help.
> 
> 
> 
> On Thursday 02 June 2005 04:48 pm, you wrote:
> > It's most likely a software problem.
> >
> > Open a TAC case so the TAC engineer can decode the
> > stack trace.
> >
> > provide;
> > sh ver
> > sh stack
> > crashinfo file if there is one in flash/bootflash.
> >
> > Rodney
> >
> > On Wed, Jun 01, 2005 at 11:17:01AM -0400, Victor Matherly wrote:
> > > Anyone have any info on this error? I get this at bootup on one of our
> > > AS5400 systems.
> > >
> > >
> > > System Bootstrap, Version 12.1(2r)XD1, RELEASE SOFTWARE (fc1)
> > > Copyright (c) 2000 by cisco Systems, Inc.
> > >
> > > *** TLB (Load/Fetch) Exception ***
> > > Access address = 0x0
> > > PC = 0xbfc1e740, Cause Reg = 0x1000008, Status Reg = 0x30400c03
> > > Interrupt Ctrl Reg = 0x1082
> > >
> > > this error message is repeated continuously. Is this unit DOA?
> > >
> > > thank you
> > >
> > >
> > > --
> > > Victor Matherly
> > > Wave Communications
> > > Systems Engineer
> > > Voice:508-761-5006
> > > Fax:508-761-5116
> > > Direct:508-395-5065
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> -- 
> Victor Matherly
> Wave Communications
> Technical Services
> Voice:508-761-5006
> Fax:508-761-5116
> Direct:508-395-5065


More information about the cisco-nsp mailing list