[c-nsp] sup720 - is using 'mls rate-limit unicast cef receive' wise/recommended?

[Rodney Dunn]

The mls rate-limit commands are hardware based rate limiters.

CoPP orginally was just done in software but it's being pushed
down to hardware to give closer to linerate dropping capability.

SPD is is strictly a process level thing.

Rodney

On Thu, Jun 23, 2005 at 08:37:03PM -0500, Dale W. Carder wrote:
> 
> On Jun 23, 2005, at 5:02 PM, Andrew Fort wrote:
> > we found that 'mls rate-limit unicast cef receive' really helped the RP
> ...
> > My question is, do other people use this?
> ...
> >  is it just unnecessary to do this?).
> 
> For the 6500/7600 TME's lurking,
> How does this solution compare to control plane policing
> and selective packet discard?
> 
> Dale
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/