[c-nsp] Router 7206 fails when rebooting

[Oliver Boehmer (oboehmer)]

Sebastian,

BoXeR <> wrote on Thursday, March 03, 2005 8:55 AM:

> Hi everyone,
> 
> I am observing that behaviour fopr the last 6 months or longer, but
> only now I decided to ask you for help.
> 
> The problem happens very often (actualy on each reboot) on few routers
> (probably no rules for that) but the most often I see it on
> 7206VXR/NPE-G1.
> 
> When rebooting, the router almost 100% times jumps into rommon mode.
> 
> When I connected a console, the following output was displayed:
> 
> *Oct 12 11:03:12.279: %SYS-5-RELOAD: Reload requested by console.
> Reload Reason: Reload command. monitor: command "boot" aborted due to
> user interrupt 

Could your NPE-G1 be affected by
http://www.cisco.com/warp/public/770/fn28135.shtml? Are any cables
connected to your AUX port? I assume the config register is set
correctly (0x2102)..

	oli