[c-nsp] 6509 Switch Utilization lights

[Paul Stewart]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Wow.... we're a long ways away from that still... that must be what it
is.. :)

Paul


Network.Security wrote:
| When you boot it up, they should all light up, one way to make sure they
| LED's aren't burned out.  :)  Otherwise, unless you are running a ton of
| traffic or have a spanning-tree loop or other anomaly, the CPU is fairly
| idle and the LED's are dark.  We have some switches with just the first
| LED going, those have about 300-400Mb sustained through them.
|
| - Scott
|
|
|>>We have some 6509's and the LED's showing switch load never light
|
| up....
| is this normal?
|
|
|
| _______________________________________________
| cisco-nsp mailing list  cisco-nsp at puck.nether.net
| https://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/
|
|
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFCPyNcqMetgU57IuQRAsxqAJ0YJ+psl1LJ669faZ2g8JIUssYblQCeJABB
h7OLtdUPgR+7pfcSPlUj3fM=
=lQG8
-----END PGP SIGNATURE-----