[c-nsp] L2/L3 configuration question

[Chris Roberts]

> I do not need to pass VLANs between the two switches.  I 
> would like to assign the 3508G an IP address so it can be 
> managed.  What is the best configuration setup for this 
> scenario to simply route between the two 6509/Sup720s?
>  
> What is the 3508G was replaced with a 3550?  Would that 
> change the configuration?
>  

In this case you could just assign a /29 to the interface, and assign an IP
address to VLAN1 of the switch from the /29, and number both the router
interfaces out of the /29.

You'd also want to assign a default route to the switch with 'ip
default-gateway' pointing to one of the 6509s (or both, with an HSRP
address) probably so that you could access it from further afield than the
6509s directly. If these routers/switches are public also be careful with
telnet access-classes on the VTY and such for security.

Cheers,
Chris.

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.859 / Virus Database: 585 - Release Date: 14/02/2005