[c-nsp] Etherchannel & 7507/5500 combo

[Jeff Kell]

James Saker wrote:
> Steven Bertsch [mailto:sbertsch at iaxs.net] writes:
> 
>>It's possible that your ports need to be on the same module or
> 
> even starting at a specific port number in series for the FEC to work.
> 
> I believe you're right on the port range limitation - I saw that referenced
> on one of Cisco's 5500 to 5500 Etherchannel configurations. When I show port
> capability, it does indicate it is restricted to the lowest ports on the
> card

More generally, a 2-channel etherchannel has to be on an odd/even pair,
such as 1-2, 3-4, etc.  A 4-channel one goes on 1-4, 5-8, 9-12, etc.

Jeff