[c-nsp] limit throughput on a 3750?

[lists at hojmark.org]

> Thanks, i am running 12.2(25)SE and i read through that doc 
> but i'm alittle confused.  The doc says that the vlan-based
> qos needs to be enabled on the port.

Yes, it needs to be configured on the L2 ports that make up the
VLAN that you want to do the QoS for.

> When it says that i'm assuming it's meaning only the port
> all my traffic leaves the network on?

No, on all the L2 ports (switchports) in that VLAN.

... If all you want to do is rate limit the traffic exiting the
box, then VLAN-based QoS isn't needed. That can be done with a
plain policer on the egress interface.

-A