[c-nsp] any way to identify DFC on my 6500 linecards?

Gert Doering gert at greenie.muc.de
Thu May 12 15:38:29 EDT 2005


Hi,

On Thu, May 12, 2005 at 11:19:13AM -0700, David Sinn wrote:
> No, the box default to lowest-common-denominator so the system in  
> question is really in PFC3A mode.  Since in my box I have a DFC3A in  
> the first slot, the Sup (slot 5) downgrades it's performance when it  
> boots:
> 
> *May 12 17:52:50.593 UTC: %OIR-SP-6-DOWNGRADE_EARL: Module 5 PFC  
> installed is not identical to system PFC and will perform at current  
> system operating mode.

So what happens if you remove the DFC on Module 5 completely?  Will 
it then go to "DFC3BXL in centralized mode"?

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list