[c-nsp] Pix can't ping PC

[Niels Bakker]

* Scott.Voll at wesd.org (Voll, Scott) [Tue 17 May 2005, 21:49 CEST]:
>I just installed a Pix 506 at a remote site.  
>
>The Pix inside address is 192.168.1.19 and there are two routers (.17 &
>.18).  Then there is a Windows XP box.  The PC can ping both routers but
>not the Pix.  The Pix can ping both routers but not the PC.
>
>All devices are in the 192.168.1.0/24 subnet.  All other PC's are
>working.  
>
>Any ideas?  

Basic troubleshooting procedures suggest that you should investigate ARP
tables on both devices and perhaps utilise a network sniffer (or monitor
their ports on the switch and watch for the appropriate traffic).

The configuration mistake is probably in a part that you consider
correct beyond doubt and thus did not include in your e-mail to the
list...

Best of luck,


	-- Niels.

--