[c-nsp] QinQ encapsulation type

[Arnold Nipper]

On 03.11.2005 16:06 Matthew Crocker wrote

> 
> I can see the MAC addresses in the Paradyne but not in the 3550.  If  
> I remove the Paradyne and connect everything to the 3550 everything  
> works as expected.  Paradyne support thinks it may be the Ethernet  
> frame type that the 3550 is expecting.  They have an option of  
> 0x8100, 0x9100 & 0x9101.   Which one should is be using?
> 

Use 0x8100. You may also want to have a look at 
http://www.cisco.com/warp/public/cc/so/neso/meso/mirt_wp.htm for better 
unhderstanding and config exaples (though CatOS)


Arnold
-- 
Arnold Nipper, AN45