[c-nsp] 56K DS0 to DS1 multiplexer?

[Matthew Crocker]

Take a look at the Adtran TSU 120 or 600 series.  YOu should be able  
to build a mux with 4 DDS channels and 1 DSX-1 channel to connection  
to a WIC-1DSU on a router

You may need to front end the 600 TSU with 4 DSU 56/64 to covert the  
DDS to v.35

-Matt

On Oct 3, 2005, at 3:25 PM, Robert Blayzor wrote:

> I recently had two four wire 56K DDS (DS0) dropped in my lap from VZ.
> The problem is, the smallest thing we can accept is a DS1.  What is  
> the
> easiest way to get a RJ48S 56K DDS (DS0) into a DS1 channel?  I've
> browsed some of the Adtran products but I've yet to find what I'm
> looking for, most of them only do FXS to DS1.
>
> TIA
>
> -- 
> Robert Blayzor, BOFH
> INOC, LLC
> rblayzor\@(inoc.net|gmail.com)
> PGP: http://www.inoc.net/~dev/
> Key fingerprint = 1E02 DABE F989 BC03 3DF5  0E93 8D02 9D0B CB1A A7B0
>
> In the beginning the Universe was created. This has made a lot of  
> people
> very angry and been widely regarded as a bad move. - Douglas Adams
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

--
Matthew S. Crocker
Vice President
Crocker Communications, Inc.
Internet Division
PO BOX 710
Greenfield, MA 01302-0710
http://www.crocker.com