[c-nsp] rx_cell_lost errors?

[Dan Hollis]

If the telco drops cells due to telco switch congestion / traffic 
policing, will that cause rx_cell_lost to increment? Cisco docs are 
ambiguous about the issue and very vaguely imply "no".

so is rx_cell_lost a telco congestion issue or a noisy/bad 
cabling/transmission issue?

Interface ATM1/0 is up
Hardware is ENHANCED ATM PA - DS3 (45000Kbps)
Framer is PMC PM7345 S/UNI-PDH, SAR is LSI ATMIZER II
Firmware rev: G153, Framer rev: 1, ATMIZER II rev: 3
   idb=0x6229CDB8, ds=0x622A5060, vc=0x622D4B40
   slot 1, unit 1, subunit 0, fci_type 0x005B, ticks 707651
   1200 rx buffers: size=512, encap=64, trailer=28, magic=4
Curr Stats:
   VCC count: current=772, peak=772
   SAR crashes: Rx SAR=0, Tx SAR=0
   rx_cell_lost=84247, rx_no_buffer=0, rx_crc_10=0
   rx_cell_len=0, rx_no_vcd=283, rx_cell_throttle=0, tx_aci_err=0

-Dan