[c-nsp] Load balancing across 2 ADSL lines

[Melvin C. etheridge]

I'm using VPDN to connect to the telco not indiv PVC's.  When a PPPoA call 
comes in the telco routes it to my via the VPDN connection based on the 
users domain.

Thanks,

Mel

----- Original Message ----- 
From: "Daniel Holme" <dholme at mistral.net>
To: <cisco-nsp at puck.nether.net>
Sent: Thursday, October 13, 2005 10:04 AM
Subject: Re: [c-nsp] Load balancing across 2 ADSL lines


> Melvin C. etheridge wrote:
>> I'm looking at tryning to do something like this for one of my customers.
>>
>> Will this work over PPPoA?
>
> Absolutely, just use a dialer, put each of the pvcs from each of the
> ADSLs into into the relevant dialer-pool and set the encapsulation to
> use the dialer. Then just enable ppp multilink in the dialer.
>
> Just make sure your provider supports MLPPP or MMP (if they require it).
> Use 'show ppp multilink' to see how the frames are getting reordered etc.
>
>
> --
> Dan Holme
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.14/128 - Release Date: 
> 10/10/2005
>
> 



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.14/128 - Release Date: 10/10/2005