[c-nsp] 7513 boot problem

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Jeff Crowe wrote:
> Hi all,
> 
> I am hoping someone has a quick fix for this one.  When I reload my 7513 I
> get errors on the reboot, but it seems to correct itself.   Anyone know how
> I can fix these errors and decrease the amount of time it takes to reload?
> 
> The router has 2 FEIP2 cards in slots 3 and 4, 2 rsp4's in slots 6 and 7.
> 
> Here is the output from the console when the router is reloaded:
> 
> 14:59:34: %SYS-5-RELOAD: Reload requested by console.
> System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1997 by cisco Systems, Inc.
> 
> SLOT 6 RSP is system master
> SLOT 7 RSP is system slave
> RSP4 processor with 262144 Kbytes of main memory
> 
> 

What version is the image that is attempting to be booted?  Looks to me
like it's a version without support for the legacy FEIP2 card so it fails
to find microcode in the image and has to revert to microcode in the ROM.


> Self decompressing the image :
> ############################################################################
> ############################################################################
> ############################################################################
> ############################################################################
> ################################################################# [OK]
> 
> %DBUS-3-SW_NOTRDY: DBUS software not ready after HARD_RESET, elapsed 13056,
> status 0x0
> -Traceback= 6030124C 6030380C 60303DA0 6030759C 60285EEC 60285FA8 601CE9F4
> 601CEC00 60263FB4 60263FA0
> %DBUS-3-SW_NOTRDY: DBUS software not ready after RESET, elapsed 13056,
> status 0x40
> -Traceback= 6030124C 60303C68 602FFC58 60303E58 6030759C 60285EEC 60285FA8
> 601CE9F4 601CEC00 60263FB4 60263FA0
> %DBUS-3-SW_NOTRDY: DBUS software not ready after DOWNLOAD, elapsed 18048,
> status 0x40
> -Traceback= 6030124C 602FFD40 60303E58 6030759C 60285EEC 60285FA8 601CE9F4
> 601CEC00 60263FB4 60263FA0
> %DBUS-3-WCSLDERR: Slot 4, error loading WCS, status 0x40 cmd/data 0xDEAD pos
> 96
> %DBUS-3-SW_NOTRDY: DBUS software not ready after RESET, elapsed 13056,
> status 0x40
> -Traceback= 6030124C 60301F40 60305F5C 602FFB2C 602FFF00 60300360 602FFDCC
> 60303E58 6030759C 60285EEC 60285FA8 601CE9F4 601CEC00 60263FB4 60263FA0
> %DBUS-3-SW_NOTRDY: DBUS software not ready after DOWNLOAD, elapsed 18048,
> status 0x40
> -Traceback= 6030124C 6030623C 602FFB2C 602FFF00 60300360 602FFDCC 60303E58
> 6030759C 60285EEC 60285FA8 601CE9F4 601CEC00 60263FB4 60263FA0
> %DBUS-3-WCSLDERR: Slot 4, error loading WCS, status 0x40 cmd/data 0x29 pos
> 2954546
> %UCODE-3-LDFAIL: Unable to download ucode from system image in slot 4,
> trying rom ucode
> %RSP-3-NOSTART: No microcode for FEIP2 card, slot 4
> %SYS-4-CONFIG_NEWER: Configuration from version 12.3 may not be correctly
> understood
> % CEF not enabled. Enable first
> %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
> 
> %DBUS-3-SW_NOTRDY: DBUS software not ready after HARD RESET, elapsed 13056,
> status 0x0
> -Traceback= 6030124C 60304770 602C8124 60292220 60010A14*** Console
> Interrupt ***
> PC = 0xbfc01024, Cause = 0x400, Status Reg = 0x30408403
> DCL Masked Interrupt Register = 0x000000ef
> DCL Interrupt Value Register = 0x00000014
> MEMD Int 6 Status Register = 0x00000000
> Self decompressing the image :
> ############################################################################
> ############################################################################
> ######################################### [OK]
> 
> At this point it starts to boot fine.
> 
> Thanks
> 
> Jeff.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (MingW32)

iD8DBQFDVUNvE1XcgMgrtyYRAiWyAKCMECK4nzBEwdTaq9F/HL2p1KCh1ACcCHR9
MIQGEPy5GLKrKAFUUw1eY9Y=
=P23n
-----END PGP SIGNATURE-----