[c-nsp] QoS on OSM - Packet marking based on ACL match - When is the support coming?

[Sam Munzani]

Thanks Ian. You answered my question.

Sam


> At 10:01 AM 9/14/2005 -0500, Sam Munzani wrote:
>
>> Does anybody know what IOS version will have support for ACL match on
>> QoS marking with OSM?
>
>
> It will never be supported on OSMs. You have to mark traffic to 
> appropriate DSCP values with policers/set ... and use that marking to 
> place traffic into queues based on the marking. The marking / policing 
> uses ACLs.
>
> The 7600-SIP-200, 7600-SIP-400, and 7600-SIP-600 can place traffic 
> into queues based upon ACLs.
>
>
> Ian
>
>
>> According to this URL,
>> http://www.cisco.com/univercd/cc/td/doc/product/core/cis7600/cfgnotes/optical/122sx/qos.htm#wp1069651 
>>
>>
>>
>> There are certain restrictions regarding how you can classify traffic on
>> the OSM.
>>
>> Note the following:
>> Using the match command -Only the match ip precedence, match ip dscp,
>> and match mpls experimental commands are supported. Access control lists
>> and other criteria are not supported as match criteria for traffic
>> classes. Please review the "configuring classification" section found
>> under "Configuring QOS on the OSMs".
>>
>> Thanks,
>> Sam Munzani
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>