[c-nsp] Smallest router that supports GigE over MM fibre

[Andris Zarins]

I'd look towards some 3560 series switch, not router. If all you need is
to route/switch approx 200m of traffic and support OSPF - perhaps switch
would be much better choice, not router, especially - because of modular
GBIC interfaces. 

If you insist on 'router' - perhaps you should look at 2821 series
boxes. They have 2 on-board 10/100/1000 cooper interfaces (in this case
you would need some cooper/mm-fiber transceiver), and will easily route
200 or more mbits. 

Hope that helps, 
Andris



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Vincent De
Keyzer
Sent: Friday, September 30, 2005 12:01 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Smallest router that supports GigE over MM fibre

Hello,

 

I am looking for a router that supports GigE over MM fibre, and 200 Mbps
of
traffic. No BGP, just some OSPF - very basic "HQ router" configuration.

 

What is my cheapest choice?

 

Vincent

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/