[c-nsp] 7600 question

[David Freedman]

> 
> You will also need to use dCEF on the line cards to achieve linerate,
> with 3 PFC3BXL (one for each except one of the linecards).


I would advise looking at the  WS-F6700-DFC3B / WS-F6700-DFC3BXL
daughterboards.


http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin0900aecd8017a5db.html


Dave.
> 
> Rubens
> 
> 
> On 9/30/05, Alexander Koch <efraim at clues.de> wrote:
>> Hiya folks,
>>
>> for an external project let me ask some 7600 question(s)...
>>
>> 1. If we want to (ab)use a 7600 as a router we are looking
>> for it be able to hold 300,000 FIB + 1,500,000 RIB entries
>> simple as that box might hold several full tables, etc., and
>> also last some years. That are rough numbers... and should
>> not be out of reach. Also what chassis should we (not) take
>> to really have 10G Ethernet linerate between cards, etc.,
>> and also what Supervisor would be advisable here?
>>
>> 2. If we were to use any 76xx as a L2 switch what (or 65xx
>> rather) what would be a good chassis (as L2 switching is
>> done between the cards if I am not completely mixing this
>> up)? Obviously some stuff would have to be less sized as the
>> above example.
>>
>> In both setups we speak of 2 4x10G and 2 48xGE cards.
>>
>> Shoot, but let me live. ;-)
>>
>> Thanks in advance,
>> Alexander
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>