[c-nsp] Enterprise IOS 12.2 default MPLS label protocol

[Eric Kagan]

Thanks Oli, 

> 12.2 mainline doesn't know about LDP, it only runs TDP. So 

What about 12.3 mainline ?


> configure your neighboring router to do tdp on the connecting 
> interface (fa0/0), and you're all set. 
> You can select the protocol on a per-interface basis (you can 
> even run both on broadcast interfaces), so running TDP 
> against this 12.2M neighbor and LDP with all others works just fine.

Would suggest this over running 12.2S ?

Thanks
Eric