[c-nsp] New ASA AIP-SSM installation... see packets hit IPS, but no alerts..

[Jonathan Charles]

OK, I figured it out, you have to go to the Virtual Sensor 0 and enable the
backplane interface.

Thanks anyway.



Jonathan

On 8/17/06, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> If I do a packet capture on the IPS (AIP-SSM-10 on an ASA5510), I see tons
> of traffic hitting the box...
>
> However, I downloaded Blue's Port Scanner and ran it and saw nothing... I
> even enabled sig 2004 (echo-reply) and pinged the crap out of a box on the
> other side... still no alerts...
>
> The backplane interface is enabled, the service-policy and class map are
> configured on the ASA, traffic is definitely hitting the box, but no alerts.
>
> I just upgraded the IPS to 5.1(1) and sig244... everything looks right...
> but nothing is working....
>
> Any ideas?
>
>
>
> Jonathan
>