[c-nsp] 7206 Config Help - DSL Aggregration
Paul Stewart
pstewart at nexicomgroup.net
Thu Aug 17 12:16:40 EDT 2006
Hi everyone...
We have a Cisco 7206VXR that we are doing DSL aggregation on currently.
Thanks to some help from a buddy of mine, I believe we have found a way
to use different radius servers dependant on their domain name at login
time.
Below is current config. What I'd like to do is to have domain abc.net
added and use another radius server (that shouldn't be hard - but the
two listed below point to same radius server today)... My biggest
challenge is trying to define separate IP pools for each domain name at
login...
Any ideas? The l2tp provider has talked about using a series of
loopback addresses on our side and have each domain point to a different
loopback....
Thanks,
Paul Stewart
aaa group server radius Nexicom
server-private 216.168.XX.XX auth-port 1812 acct-port 1813 key 7
XXXXXXXXXXXX
server-private 216.168.XX.XX auth-port 1645 acct-port 0 key 7
XXXXXXXXXXXXX
ip radius source-interface Loopback0
aaa authentication ppp Nexicom group Nexicom
aaa authorization network Nexicom group Nexicom
aaa accounting delay-start
aaa accounting network Nexicom start-stop group Nexicom
ip host nexicom.net 216.168.XXX.XXX 216.168.XXX.XXX
ip host anotherdomain.net 216.168.XX.XX 216.168.XX.XX
virtual-profile if-needed
vpdn enable
vpdn multihop
vpdn authen-before-forward
vpdn authorize directed-request
vpdn-group XXXXXXXXXXXXXXXXX
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname XXXXXXXXXX
local name XXXXX
lcp renegotiation always
l2tp tunnel password 7 XXXXXXXXXX
bba-group pppoe global
virtual-template 1
interface ATM1/0
no ip address
no atm ilmi-keepalive
!
interface ATM1/0.1 point-to-point
description XXXXXXXXXXXXXXXXXXXXXX
ip address 10.70.82.26 255.255.255.252
no snmp trap link-status
atm route-bridged ip
pvc 2/263
!
interface Virtual-Template1
ip unnumbered Loopback0
ip mtu 1492
ip mroute-cache
no logging event link-status
no snmp trap link-status
peer default ip address pool default
ppp authentication pap Nexicom
ppp authorization Nexicom
ppp accounting Nexicom
no clns route-cache
ip local pool default 123.123.123.1 123.123.123.254
radius-server attribute 44 include-in-access-req
radius-server attribute 32 include-in-access-req
radius-server attribute 32 include-in-accounting-req
radius-server attribute 55 include-in-acct-req
radius-server attribute nas-port format d
radius-server directed-request
radius-server domain-stripping
radius-server vsa send accounting
radius-server vsa send authentication
More information about the cisco-nsp
mailing list