[c-nsp] 7206 Config Help - DSL Aggregration

[Robert Blayzor]

Paul Stewart wrote:
> Hi everyone...
> 
> We have a Cisco 7206VXR that we are doing DSL aggregation on currently.
> Thanks to some help from a buddy of mine, I believe we have found a way
> to use different radius servers dependant on their domain name at login
> time.
> 
> Below is current config.  What I'd like to do is to have domain abc.net
> added and use another radius server (that shouldn't be hard - but the
> two listed below point to same radius server today)... My biggest
> challenge is trying to define separate IP pools for each domain name at
> login...
> 
> Any ideas?  The l2tp provider has talked about using a series of
> loopback addresses on our side and have each domain point to a different
> loopback....


If they are all coming on the same PVC and bound to the same
Virtual-Template, I don't think you can direct RADIUS requests to
another set of servers.  If they come on a separate PVC you can bind
them to another Virtual-Template to which uses another AAA group and
another set of RADIUS servers.  I don't think the router itself will
look at the RADIUS username attribute and direct it to another set of
RADIUS servers, that's what proxy RADIUS is for.

However, on later versions of IOS if you were using PPPoE I think you
can setup subscriber profiles and services to do just that.

-- 
Robert Blayzor, BOFH
INOC, LLC
rblayzor\@(inoc.net|gmail.com)
PGP: 0x66F90BFC @ http://pgp.mit.edu
Key fingerprint = 6296 F715 038B 44C1 2720  292A 8580 500E 66F9 0BFC

To define recursion, we must first define recursion.