[c-nsp] Retrieving running config via SNMP

[Francois Corthésy]

Hi,

We use this OID : 1.3.6.1.4.1.9.2.1.55.
it works on a handfull of Cisco, including a 7206 VXR.

But I'm not all that sure that it's the running-config, as opposed to 
the startup config. You might want to check it out for yourself.


Francois

Vincent De Keyzer wrote:
> Hello,
>
>  
>
> we had a problem this morning where the config of a customer router had not
> been saved, and a power outage occurred after which the router rebooted with
> an older and incorrect config. Shame on us.
>
>  
>
> What we would like to do now is to write a script that gets running and
> startup configs of each device, diffs them, and sends a warning if
> differences are seen.
>
>  
>
> We already have a script that gets the running configs via a SNMP-triggered
> writenet (enterprises.cisco.local.lsystem.writeNet from OLD-CISCO-SYS-MIB).
>
>  
>
> How do I get the running config with SNMP ? I have found
> enterprises.cisco.local.lflash.flashToNet in OLD-CISCO-FLASH-MIB, but it
> does not work on my routers:
>
>  
>
> [vdk ~]$ snmpwalk -c private -v 2c router 1.3.6.1.4.1.9.2.10
>
> SNMPv2-SMI::enterprises.9.2.10 = No Such Object available on this agent at
> this OID
>
> [vdk ~]$
>
>  
>
> "router" is a 7206VXR running 12.2(25)S4.
>
>  
>
> Anyone?
>
>  
>
> Vincent
>
>  
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>