[c-nsp] full utilization on a T1 causing CRC/frame errors?

[Robert D. Holtz - Lists]

No ... full utilization will not cause errors.

This is the same as saying that placing 24 voice calls, i.e., using all 24
channels of the T, at a time on a T1 will cause problems!

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Burton Windle
Sent: Monday, August 28, 2006 1:15 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] full utilization on a T1 causing CRC/frame errors?

Maybe I'm just showing my inexperience, but I have an ILEC telling me 
(verbally; they refused to put it in writing, suggesting that I google it 
instead) that fulling utilizating a T1 frame relay circuit will cause CRC, 
frame, and 'abort' input errors on my serial int's input counters.

Any truth to this?


-- 
Burton Windle                           bwindle at fint.org

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/