[c-nsp] 96Port rj45 cards.

Saku Ytti saku+cisco-nsp at ytti.fi
Thu Dec 7 10:16:22 EST 2006


On (2006-12-07 10:12 -0500), Drew Weaver wrote:

> My main question is, (since there are no photos, diagrams on cisco's
> site) Are the 96 ports actually on the card itself? or is there a

You have RJ21/Telco connectors where you'll connect the
patch panel that'll have RJ45.
Thing to know that these cards are not fabric enabled, so they
will use the shared 32Gbps bus, which has implications to lookup
speed too. Might not be an issue, but something you should consider.

> connector on the card which breaks out into port wire 'racks' that you
> would install at the destination, and if there is a connector on the
> card which connects to the wire rack, what type of media is it?
>  
> also any general comments about these cards are welcome.


>  
> thanks,
> -Drew
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
  ++ytti


More information about the cisco-nsp mailing list