[c-nsp] WS-X6148A-GE-TX Etherchannel limit

[Robert Hass]

On Mon, 25 Dec 2006, lee.e.rian at census.gov wrote:

>Probably because it's showing the backplane [or fabric?] conection.
>
>Try doing a "show asic slot <n>" and see if there's 6 of anything..  eg:
>sup720>sh asic slot 3
>Module in slot 3 has 4 type(s) of ASICs

Another interesting issue which I have on one of our 6500 is that
command 'sh platform hardware capacity interface' doesn't display
buffer sizes for WS-SUP720-3B (slot 1) and WS-X6148-GE-TX (slot 3)...
on this 6500 I'm affected with a lot of overruns due to >1Gb/s for 1
ASIC (shitty WS-X6148 issue).

dc1-sw4#sh platform hardware capacity interface
Interface Resources
  Interface drops:
    Module    Total drops:    Tx            Rx      Highest drop port:  Tx  Rx
    1                          0          6771                           0   1
    3                          0      27344519                           0  17

  Interface buffer sizes:
    Module                            Bytes:     Tx buffer           Rx buffer
dc1-sw4#

But why below command doesn't display buffer sizes ?! It's running
12.2(18)SXF4.

Robert