[c-nsp] More than 2 FE on 26xx possible?

James O'Farrell James.O'Farrell at valuelink.co.uk
Mon Feb 13 11:07:26 EST 2006

What about NM-4E or NM-16ESW(5).

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jeremy Hinton
Sent: 13 February 2006 15:44
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] More than 2 FE on 26xx possible?

	Subject says it all. Is it in any way possible (via NM/WICs/etc)
to get 
more than 2 fast ethernet ports on a 26xx platform router? If so, what 
platform and what modules? I thought this was not possible, until i 
found a recommendation for a "2620 with four Fast Ethernet ports" in the

Cisco ISP Essentials book. I'm inclinced to think this is just poor 
editing/errata, as i can't seem to locate any ethernet NM/WIC cars that 
work in a 26xx.

- jeremy
cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

ValueLink is a specialist service provider of financial data to the major UK and International centres. Our clients require reliable, accurate data with maximum coverage on a fixed time delayed basis. We work closely with each of our clients to provide a service which meets their specific requirements and maximises efficiency of their process. 

For further information visit our website @ www.valuelink.co.uk

CONFIDENTIALITY: The information in this e-mail and any attachment is confidential. It is intended only for the named recipient(s). If you are not a named recipient, please notify the sender immediately and do not read, use, copy or disseminate this information.

ValueLink Information Services Ltd accepts no liability whatsoever for any direct or consequential loss arising from the use, or reliance on, this e-mail or it's contents.

More information about the cisco-nsp mailing list