[c-nsp] Using AUX port as 1 port terminal server
David Freedman
david.freedman at uk.clara.net
Tue Feb 21 13:48:15 EST 2006
line aux 0
access-class <acl> in
transport preferred all
transport input telnet
transport output all
stopbits 1
If it worked, you can telnet to port 2001 on the router.
Jee Kay wrote:
> I currently have a situation where I frequently put a pair of routers
> onto remote sites. Cost constraints prevent me installing a full set
> of terminal servers onto the same location, although I am currently
> investigating the small 1/2 port offerings from various companies.
>
> My question is: is it possible to 'cross-connect' the AUX port on one
> router to the CON port on the other router and somehow connect out of
> Router1's AUX into Router2's CON?
>
> Thanks,
> Ras
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list