[c-nsp] Multilink PPP with PPPoA?

[Malik Naeem]

Hi

I dont have any idea whether it is possible to merge two DSL lines using 
PPPoA. But you can do this by creating bridge interfaces for the 
respective DSL circuit and then just add "ip load sharing" line in the 
configuration of each interface. By doing so, the traffic will be evenly 
distributed on the DSL circuits.

Regards

Naeem

-- 
Naeem-ud-Din
Transmission Engineer
MobiServe, Pakistan
+92-300-400-3871




Melvin C. etheridge wrote:

>I've got a customer who wants to bond multiple DSL circuits using 
>something like a 1700 with 2 WIC-1ADSL cards.  They'll be connecting to us 
>as PPPoA virtual-access interfaces coming to us over l2tp tunnels from 
>the ILEC. 
>
>We are currently providing PPPoA on single lines now. 
>
>What should the config be for the 1700 to be setup as multilink PPP?
>
>Will I need to change anything on my end on my 3640?
>
>Will this work using my radius and setting it up as follows:
>
>Username:                  xxxxx
>Password:                  xxxxx    
>Port-Limit:                  2
>Service-Type:             Framed-User
>NAS-Port-Type:        Virtual
>Framed-Address:        xxx.xxx.xxx.xxx
>Framed-Protocol:        MPPP
>
>
>THANKS!!!
>
>Mel
>