[c-nsp] 122-28.SB on 7304 (was: 7206)

[Per Carlson]

On Fri, Jun 02, 2006 at 08:00:42AM +0300, Saku Ytti wrote:

>Having said that, I'm running 12.2(28)SB on all my NPE400,
>NPE-G1 and 12.2(28)SB1 on all NSE100 and so far I'm
>extremely satisfied with it.

We gave SB1 a go on a 7304/NSE100 in our lab, but that wasn't any
pleasure. The TACACS+ implementation didn't work properly, so we
had to resolve back to 20S8. Login were ok, but when trying to
enter exec-mode, the 7304 only sent the first two letters of the
enable password to the TACACS-server. Of course, this is perfectly
fine if you just have a two letter password, but we didn't :)

Currently, the 7304 is running SBC3, which (so far) works without
any problems.

-- 
Pelle