[c-nsp] Looking for example dialup configs for a PA-MC-2T1

[Robert Boyle]

At 02:43 PM 6/2/2006, you wrote:
>Additionally, there will be two hunt-groups for the PRI - the first
>will be associated with the first 16 channels and will be used for
>ISDN dialin, while the second will be associated with the last 7
>channels and will be used for analog dialin.  Multi-link for up to
>four channels at a time will be used (up to 4 ISDN or up to 4 56k
>bonded channels).  Any configs at all similar to this situation would
>be greatly appreciated.

I don't think you can do anything with analog calls on a PA-MC-2T1. 
You would need DSPs. ISDN calls should work fine. Just use a basic 
AS53xx config and it will be the same.

-Robert



Tellurian Networks - The Ultimate Internet Connection
http://www.tellurian.com | 888-TELLURIAN | 973-300-9211
"Well done is better than well said." - Benjamin Franklin