[c-nsp] 6500/7600 "reserved" power for secondary sups

[Jared Mauch]

On Fri, Mar 03, 2006 at 03:28:59PM -0500, Richard A Steenbergen wrote:
> Hello,
> 
> Is there a way to disable the automatically reserved power for a secondary 
> supervisor on the 6500/7600s? For example:
> 
> system power redundancy mode = redundant
> system power total =     2331.00 Watts (55.50 Amps @ 42V)
> system power used =      1280.53 Watts (30.49 Amps @ 42V)
> system power available = 1050.47 Watts (25.01 Amps @ 42V)
>                         Power-Capacity PS-Fan Output Oper
> PS   Type               Watts   A @42V Status Status State
> ---- ------------------ ------- ------ ------ ------ -----
> 1    WS-CAC-2500W       2331.00 55.50  OK     OK     on 
> 2    WS-CAC-2500W       2331.00 55.50  OK     OK     on 
>                         Pwr-Requested  Pwr-Allocated  Admin Oper
> Slot Card-Type          Watts   A @42V Watts   A @42V State State
> ---- ------------------ ------- ------ ------- ------ ----- -----
> 1    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
> 3    WS-X6748-SFP        328.44  7.82   328.44  7.82  on    on
> 5    WS-SUP720-3BXL      328.44  7.82   328.44  7.82  on    on
> 6    (Redundant Sup)       -     -      328.44  7.82  -     -
> 
> Under slot 6, the system is reserving power for 328.44 watts (the same as 
> the primary sup720-3bxl), but there is no card in slot 6, nor has there 
> ever been.

	move your 6704 (or something else) to slot6

	- jared


-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.