[c-nsp] Dynamic Routing over Tunnel (7507->1811w) ospf or eigrp

[Dave Temkin]

Do a "debug ip routing" and flap the EIGRP or OSPF session and show us the
output.

Thanks,
-Dave


On Wed, 8 Mar 2006, Skeeve Stevens wrote:

>
> Hey guys
>
> 	I've spent 2 dozen hours trying to make this work and its driving me
> nuts.
>
> 	I don't have the 'tunnel down to recursive routing' issue.. I got
> past that.
>
> 	I have an up tunnel, which is all good. I have routes flowing from
> the 1811 (small remote location) to the 7507 in either eigrp or ospf, but no
> routing protocol will propagate into the 1811.  ospf or eigrp.
>
> 	When I was trying ospf, the routes were in the database on the 1811,
> but not making it into the table. unsure why.
>
> 	Is there something I am missing here. because I am almost beat after
> the amount of hours I have put on this.
>
> Any help would be greatly appreciated.
>
>
> _______________________________________________________
> Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
> Website: www.skeeve.org  - Telephone: (0414) 753 383
> Address: P.O Box 1035, Epping, NSW, 1710, Australia
>
> eIntellego - skeeve at eintellego.net - www.eintellego.net
> _______________________________________________________
> I'm a groove licked love child king of the verse
> Si vis pacem, para bellum
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>