[c-nsp] Dynamic Routing over Tunnel (7507->1811w) ospf or eigrp

[Skeeve Stevens]

7507

6d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel11, changed
state to up
6d19h: is_up: 1 state: 4 sub state: 1 line: 0
6d19h: RT: add 10.11.6.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.0.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.2.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.1.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.81.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.82.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.83.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.84.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.85.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.86.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.7.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add 10.11.3.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add x.x.90.1/32 via 172.16.1.10, eigrp metric [90/297372416]
6d19h: RT: add x.x.91.0/24 via 172.16.1.10, eigrp metric [90/297246976]
6d19h: RT: add x.x.90.8/29 via 172.16.1.10, eigrp metric [90/297246976]

Takes routes ok

The 1811 just says
*Mar  7 21:31:27.079: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 11: Neighbor 172.16.1.9
(Tunnel11) is up: new adjacency
*Mar  7 21:32:26.123: RT: NET-RED 0.0.0.0/0
*Mar  7 21:33:26.123: RT: NET-RED 0.0.0.0/0




-----Original Message-----
From: Dave Temkin [mailto:dave at ordinaryworld.com] 
Sent: Wednesday, 8 March 2006 1:27 AM
To: Skeeve Stevens
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Dynamic Routing over Tunnel (7507->1811w) ospf or eigrp

Do a "debug ip routing" and flap the EIGRP or OSPF session and show us the
output.

Thanks,
-Dave


On Wed, 8 Mar 2006, Skeeve Stevens wrote:

>
> Hey guys
>
> 	I've spent 2 dozen hours trying to make this work and its driving me

> nuts.
>
> 	I don't have the 'tunnel down to recursive routing' issue.. I got 
> past that.
>
> 	I have an up tunnel, which is all good. I have routes flowing from 
> the 1811 (small remote location) to the 7507 in either eigrp or ospf, 
> but no routing protocol will propagate into the 1811.  ospf or eigrp.
>
> 	When I was trying ospf, the routes were in the database on the 1811,

> but not making it into the table. unsure why.
>
> 	Is there something I am missing here. because I am almost beat after

> the amount of hours I have put on this.
>
> Any help would be greatly appreciated.
>
>
> _______________________________________________________
> Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
> Website: www.skeeve.org  - Telephone: (0414) 753 383
> Address: P.O Box 1035, Epping, NSW, 1710, Australia
>
> eIntellego - skeeve at eintellego.net - www.eintellego.net 
> _______________________________________________________
> I'm a groove licked love child king of the verse Si vis pacem, para 
> bellum
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

========================================================================
 iBurst Wireless Broadband from $34.95/month   www.platformnetworks.net
 Forward undetected SPAM to:                   spam at mailsecurity.net.au
========================================================================