[c-nsp] Multicast Problems

Peter Salanki peter.salanki at bahnhof.net
Tue Mar 21 10:45:02 EST 2006


My networks looks like this: Sender on a peer-as-(MSDP,PIM-SM)>RP- 
ROUTER->ROUTER->CLIENT

RP-Router Running: 12.2(18)SXD6
Router: 12.2(18)SXD3
They are c6500-supervisor2

I have added correct mroutes to the sources.

When I try to join a group on CLIENT which is origined by peer-as,  
everything seems nice on RP-ROUTER:
c6509-tule#sh ip mroute 239.255.102.2
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C -  
Connected,
        L - Local, P - Pruned, R - RP-bit set, F - Register flag,
        T - SPT-bit set, J - Join SPT, M - MSDP created entry,
        X - Proxy Join Timer Running, A - Candidate for MSDP  
Advertisement,
        U - URD, I - Received Source Specific Host Report, Z -  
Multicast Tunnel
        Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode

(*, 239.255.102.2), 05:11:33/00:03:24, RP 213.80.98.4, flags: S
   Incoming interface: Null, RPF nbr 0.0.0.0
   Outgoing interface list:
     Vlan300, Forward/Sparse, 00:08:18/00:03:24

(193.222.141.166, 239.255.102.2), 05:11:33/00:03:29, flags: T
   Incoming interface: GigabitEthernet3/15, RPF nbr 85.24.152.7,  
Mroute, RPF-MFD
   Outgoing interface list:
     Vlan300, Forward/Sparse, 00:08:18/00:03:24, H

c6509-tule#

On ROUTER, things look pretty ok too:
c6509-sterik#sh ip mroute 239.255.102.2
....

(*, 239.255.102.2), 00:17:35/00:02:51, RP 213.80.98.4, flags: S
   Incoming interface: Vlan300, RPF nbr 85.24.151.1, Partial-SC
   Outgoing interface list:
     Vlan4, Forward/Sparse, 00:17:35/00:02:51

c6509-sterik#

The group won't show up in "sh ip mroute active" on c6509-sterik  
(ROUTER) but it shows in c6509-tule (RP-ROUTER)

Routing of groups where sources are directly connected to c6509- 
sterik (ROUTER) works fine, even when clients are not directly  
connected. Routing from c6509-sterik (ROUTER) to clients through the  
RP doesen't seem to work though.

Thanks for any tips

/Peter Salanki
Bahnhof AB (AS8473)
Stockholm, Sweden



More information about the cisco-nsp mailing list