[c-nsp] Rate limiting via radius

[Paul Stewart]

Thanks for the reply...

The Radius server is sending it to the best of our knowledge but it's
not showing up at all on the router.  Weird though, the test account
slows down to a crawl but when I do a "show interface vi233 rate-limit"
it doesn't show anything....

I have restarted etc. and it loads the users file no problem and doesn't
complain about any issues...

Thanks,

Paul
 

-----Original Message-----
From: Kristofer Sigurdsson [mailto:kristosig at gmail.com] 
Sent: Thursday, May 04, 2006 11:03 AM
To: Paul Stewart
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Rate limiting via radius

We're using FreeRADIUS and have no problems at all (not rate limiting,
but using other interface commands).

If you have more AV-Pair attributes, you might have to use "+=" add new
ones.

What exactly is not working?  Is the RADIUS server delivering it
correctly and the router not using it, or do you have problems getting
the RADIUS server to deliver?  Do you have a sample output from the
RADIUS server?

-Kristo

2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> Thanks... We've had problems getting this to work but will continue 
> investigating..
>
> Does anyone have a complete sample of this in a working radius config 
> file?  We're using Cistron if that matters...
>
> Paul Stewart
> IP Routing/Switching
> Nexicom Inc.
> http://www.nexicom.net/
>
> -----Original Message-----
> From: Kristofer Sigurdsson [mailto:kristosig at gmail.com]
> Sent: Thursday, May 04, 2006 10:48 AM
> To: Paul Stewart
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Rate limiting via radius
>
> Maybe you could use RADIUS AV-pairs to put in rate limiting commands 
> on the virtual access interfaces?
>
> Like so:
>
> cisco-avpair = lcp:interface-config#1=rate-limit input [...]
>
> 2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> > Can anyone tell me what attributes I can use to do rate-limiting on 
> > our 7206VXR that's terminating DSL users both via PPPOE and
PPPoVPDN?
>
> > Our 7206VXR has a number of l2tp tunnels coming in from our telco 
> > provider and also direct OC-3 termination from our own DSLAMS.
> >
> > We need a way to limit on a per customer basis using Radius....
> >
> > Thanks in advance,
> >
> > Paul Stewart
> > IP Routing/Switching
> > Nexicom Inc.
> > http://www.nexicom.net/
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>