[c-nsp] Rate limiting via radius

[Kristofer Sigurdsson]

Could you paste the RADIUS reply (which you can get with a utility
like radtest)?

2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> Thanks for the reply...
>
> The Radius server is sending it to the best of our knowledge but it's
> not showing up at all on the router.  Weird though, the test account
> slows down to a crawl but when I do a "show interface vi233 rate-limit"
> it doesn't show anything....
>
> I have restarted etc. and it loads the users file no problem and doesn't
> complain about any issues...
>
> Thanks,
>
> Paul
>
>
> -----Original Message-----
> From: Kristofer Sigurdsson [mailto:kristosig at gmail.com]
> Sent: Thursday, May 04, 2006 11:03 AM
> To: Paul Stewart
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Rate limiting via radius
>
> We're using FreeRADIUS and have no problems at all (not rate limiting,
> but using other interface commands).
>
> If you have more AV-Pair attributes, you might have to use "+=" add new
> ones.
>
> What exactly is not working?  Is the RADIUS server delivering it
> correctly and the router not using it, or do you have problems getting
> the RADIUS server to deliver?  Do you have a sample output from the
> RADIUS server?
>
> -Kristo
>
> 2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> > Thanks... We've had problems getting this to work but will continue
> > investigating..
> >
> > Does anyone have a complete sample of this in a working radius config
> > file?  We're using Cistron if that matters...
> >
> > Paul Stewart
> > IP Routing/Switching
> > Nexicom Inc.
> > http://www.nexicom.net/
> >
> > -----Original Message-----
> > From: Kristofer Sigurdsson [mailto:kristosig at gmail.com]
> > Sent: Thursday, May 04, 2006 10:48 AM
> > To: Paul Stewart
> > Cc: cisco-nsp at puck.nether.net
> > Subject: Re: [c-nsp] Rate limiting via radius
> >
> > Maybe you could use RADIUS AV-pairs to put in rate limiting commands
> > on the virtual access interfaces?
> >
> > Like so:
> >
> > cisco-avpair = lcp:interface-config#1=rate-limit input [...]
> >
> > 2006/5/4, Paul Stewart <pstewart at nexicomgroup.net>:
> > > Can anyone tell me what attributes I can use to do rate-limiting on
> > > our 7206VXR that's terminating DSL users both via PPPOE and
> PPPoVPDN?
> >
> > > Our 7206VXR has a number of l2tp tunnels coming in from our telco
> > > provider and also direct OC-3 termination from our own DSLAMS.
> > >
> > > We need a way to limit on a per customer basis using Radius....
> > >
> > > Thanks in advance,
> > >
> > > Paul Stewart
> > > IP Routing/Switching
> > > Nexicom Inc.
> > > http://www.nexicom.net/
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> >
>