[c-nsp] WS-F6700-DFC3A "Incompatible" Error message

[Saku Ytti]

On (2006-11-01 09:25 -0800), Richard J. Sears wrote:

> We have a client that has purchased a  WS-X6748-GE-TX with the WS-F6700-DFC3A
> DFC card and is getting the following message after installing the blade
> into a 6509 with the WS-SUP720-3BXL (including the WS-F6K-PFC3BXL)
> engine:

This means that your whole system will need to operate in PFC3A mode,
to use that DFC3A.
To put it simply, assuming you had reason to buy 3BXL in the first
place your options are:
 1) remove DFC3A and replace it with CFC
 2) buy DFC3BXL.

Thanks,
-- 
  ++ytti