[c-nsp] inconsistent TLB values

sthaug at nethelp.no sthaug at nethelp.no
Wed Oct 4 17:08:08 EDT 2006


> You might have wrong Translational Bridge (TB) default values for vlan 
> 1002.
> 
> can you pls get us the output of 'show vlan id 1002' and see if 'Trans1' 
> and 'Trans2' are non-zero. The default value on them should be 0, but in 
> some code it was set to '1' and '1003'. If it is not zero, we need to 
> change it to zero.

Something I have wished for many times: A knob which made it possible
to treat VLANs 1002 - 1005 like any other VLAN, with no translational
bridge behavior.

I consider the special treatment of VLANs 1002 - 1005 historical cruft
at this point.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the cisco-nsp mailing list