[c-nsp] X25 translation and the Lucent FT2000

[Mark Charangwa]

If I got you correctly, a statement like: 
translate tcp <ip add> x25 <x.121 add>; 
and 
translate x25 <x.121 add> tcp <ip add> local quiet swap; 
for the other way round should help.

Hope this helps

Rgds, 

Mark C.

-----Original Message-----
From: Joe Freeman [mailto:joe at netbyjoe.com] 
Sent: Thursday, October 12, 2006 5:16 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] X25 translation and the Lucent FT2000

I'm in the process of centralizing management of all our FT2000's deployed
in the field. Most, if not all, of these units will only run TL/1 on the X25
interface, so I'm connecting them to an NM-8A/S port with a CAB-232FC DCE
cable.

I've done X25 and XoT many times in the past, but this is the first time
I've actually tried to use the IP to X25 translation.

The central management server (INC) doesn't run X25; it expects to see a tcp
session for the TL/1 stream, so all the X25 stuff needs to be handled at the
router. (2621XM running 12.2-37 enterprise, GD release)

If anyone has any tips, or sample configs for this, I'd appreciate it.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/