[c-nsp] 7960+3524-PWR

[Alex]

Asbjorn Hojmark - Lists wrote:
>>I've been fighting with my 3524 to try and allow the use of 
>>the "switch" facility... The config is as follows:
>>
>>interface FastEthernet0/3
>>  description Paul Phone/Switch
>>  duplex full
>>  speed 100
>>  switchport access vlan 100
>>  switchport voice vlan 200
>>  spanning-tree portfast
>>end
> 
> 
> The 3500 XLs need to be configured as trunk for phones. There's
> no 'magic trunking' as on the more recent switches. So something
> like:
> 
> interface FastEthernet0/3
>   desc Paul Phone/Switch
>   switch trunk encap dot1q
>   switch trunk native vlan 100
>   switch trunk allow vlan 100,200
>   switch mode trunk
>   switch voice vlan 200
>   spanning-tree portfast trunk
> 
> (Use auto speed and duplex. It works fine, better actually)

Hi,

Thanks to everyone who replied, it's worked a treat.

Thanks,

A.