[c-nsp] Per-VRF Router-ID on Sup720 ?

[Dean Smith]

Thanks

I see SRA is available on CCO for the 7600+Sup720+MSFC3 but not via the
CAT6000+Sup720+MSFC3 route

No obvious differences in the images for the SXF images for the 2 platforms
- I wonder how long it will be until the SRA image is supported on the 6500
?

Dean

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: 06 September 2006 18:48
To: Dean Smith
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Per-VRF Router-ID on Sup720 ?

Hi,

On Wed, Sep 06, 2006 at 06:42:24PM +0100, Dean Smith wrote:
> Does anyone know if "Per-VRF Assignment of BGP Router ID" is available 
> on the Sup720 ?
>  
> Feature says 12.2(33)SRA but not show how that train ties to the
> 12.2(18)SXF5 code on the 720

SRA is what comes after SXF if you're adventurous (and don't want software
modularity).

"Different can of worms".

gert
--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de