[c-nsp] spanning-tree and redundant links

[Asbjorn Hojmark - Lists]

> So in this case, I would use the command: 
> 6509-sw1<config>#spanning-tree vlan 10 root primary
> And set the second switch to root secondary, correct?

ACK

> Back to Jon Mendoza's point, if I did it this way, I could 
> distribute the load on the switches.  Say the next Vlan I setup
> is Vlan20 and I make the HSRP active router and root bridge for
> vlan20 6509-sw2.

ACK

-A